Self Regulating Heating Tape - Type H2OWAT Description
H2OWAT is a parallel resistance, cut to length on site 240v self regulating heating cable designed to compensate for heat losses from hot water distribution systems, as well as offering the option to disinfect periodically against Legionella.
Type H2OWAT heating tape compensates for heat loss from hot water pipe work particularly where modern non-recalculating systems employing a single feed pipe are used. Feed pipe to hot taps cools rapidly under no-flow conditions and this can be overcome by tracing the pipe with heating tape under thermal insulation.
This will ensure that water is always available for draw-off at a constant temperature usually between 55ºC and 65ºC.
You will require a Termination Kit to terminate/seal the front and back end of the heating tape.
H2OWAT heating tape adjusts heat output to equal the heat loss from the pipe work. As pipe temperature falls under no-flow conditions H2OWAT increases output. As the pipe temperature increases under hot water flow conditions so output from H2OWAT decreases.
The H2OWATT Heating System is designed to work within specific design parameters with regards to Insulation Thickness, Pipe Size and Ambient Temperature. (please refer to Spec Sheet F1024-1for details.)
Suitable for internal hotwater temperature maintenance. (as listed in Clause 1 BS EN 62395-1:2006).
Type H2OWAT heating tape compensates for heat loss from hot water pipe work particularly where modern non-recalculating systems employing a single feed pipe are used. Feed pipe to hot taps cools rapidly under no-flow conditions and this can be overcome by tracing the pipe with heating tape under thermal insulation.
This will ensure that water is always available for draw-off at a constant temperature usually between 55ºC and 65ºC.
You will require a Termination Kit to terminate/seal the front and back end of the heating tape.
H2OWAT heating tape adjusts heat output to equal the heat loss from the pipe work. As pipe temperature falls under no-flow conditions H2OWAT increases output. As the pipe temperature increases under hot water flow conditions so output from H2OWAT decreases.
The H2OWATT Heating System is designed to work within specific design parameters with regards to Insulation Thickness, Pipe Size and Ambient Temperature. (please refer to Spec Sheet F1024-1for details.)
Suitable for internal hotwater temperature maintenance. (as listed in Clause 1 BS EN 62395-1:2006).
